Новый чехол для мотоцикла белый с частицами, устойчивыми к износу, для модификации SX SXF EXC XC CRF YZF WR TC FC TE RMZ 125 150 250 300 350.

Seat cover installation instructions:1. Install the motorcycle polo tool is a nail gun, one quarter inch nail, screwdriver, pliers, scissors.2. Remove the seat bottom seat from the motorcycle.3. Put the new seat cushion sets of seat, make sure the seat cushion set in the center of the base, with a nail gun on the base with good stitching needle fixed on both ends.4. Then it with stitching needle fixed on both sides of the center.5 slowly down the side of the seating of the stretch to flattening fold, then immediately with stitching needle fixed.6, be careful to seating head stretch until smooth smooth, then use stitching needle fixed.7, be careful to seating tail stretching until smooth smooth, then use stitching needle fixed.8. If you find a seat covers the middle fold, please remove some stitching needle, then tweak fold and fixed it up.9. Carefully remove extra seating material with scissors. It is about 1 cm far from stitching needle.10. Installed new seating base put back in the motorcycle later on.  

package contains

Installation instructions are not included, only one product is included

notes

If you can't determine the accessories, please check it yourself or provide the motorcycle model to check. If you don't provide a check on your motorcycle model, we assume you know 100% about the accessory. We will not pay for inappropriate returns. Please measure the installation size before purchasing to get the most suitable product. Please allow 0.5-1 inch (1 inch = 2.54 cm) difference due to manual measurement. Please carefully check the appearance, size and shape of the product before placing an order, and then compare with your original product, thank you.

---