10PCS XRushed two drill metal sensor proximity switch SN04-P PNP three-wire normally open with screws installed by free shipping |

Brand NameXIN NUO QIMaterialMixtureis_customizedYesUsageOtherOutputSwitching TransducerTheoryOptical SensorTypeBiosensorMeasurement unitpiece/piecesEach pack10

Unavailable in 

Description

 

           

 

 

   

 

 

Models and parameters:

Brand:GRAVITY Model:SN04-P

Appearance:Square-angle Size: 18 * 18 * 36 (mm)

Output: PNPDC three-wire normally open Detection distance:5mm

Power supply voltage:10-30VDC

Output Current:300mA

Can detect objects:Metal body

Case Material: Plastic(Green)

Proximity switch definition:

Inductive proximity switches from the high-frequency oscillations, detection, amplification, trigger, and output circuitThe oscillator at the detector generates an alternating magnetic field when a metal object near the testing side, the eddy current generated in the metal absorbs the energy of the oscillator, to weaken to stop vibration. Oscillation of the oscillator stops oscillating these two states and is converted into an electrical signal by the detector, amplified trigger output circuit.

 

Please counterparts weight

 

 

 

 

Detection distance Sn [mm]

Detection distance 5MM

DC

Three wire-type non-submerged

 

 

NPN

Normally open

 

SN04-N

 

 

 

NPN

NC

 

 

SN04-N2

DC

Three wire-type buried

 

 

PNP

Normally open

 

SN04-P

 

 

 

PNP

NC

SN04-P2

Operating voltage UB[V] 10-30VDC Continuous current IL[MA] 300MA Switching frequency [HZ] 500 Short circuit protection No Polarity protection Have Protection class Ip65 Output indicator LED red Operating temperature [] -25 ... +70 Connection 1.5m, PVC cable Packing List Boxes installed by screw Normally open (NO) and normally closed (NC) difference:
Normally open (NO) is the normal state of the signal output line is disconnected and no signal is output, when the object is closed when the sensor output signal.
Normally closed (NC) is the normal state of the signal output line is closed, a continuous signal output to the object only when the sensor is disconnected, off signal.
Two types of proximity switch according to actual needs.

 

Three wire wiring connection:
Dumplings color is connected to the positive power supply is connected to the supply blue negative, black is connected to the load (output). Look at the baby on the specific wiring diagram.

Two wire connection method (DC or AC):
Brown the negative cable to connect the load, the load line and then connect the positive power of positive, blue negative direct connection to the power supply.

Specific connection refer to the wiring diagram on the switch plate to wiring,Do not pick the wrong polarity

 

Electrical connection

 

 

       

 

 

 

             

 

     

 

   

 

 

---