Seagate SkyHawk 1TB Surveillance Hard Drive HDD 3.5 5900Rpm 64MB Cache Internal Disk SATA 6Gb/s 1 TB Harddisk Monitoring HD |

Seagate SkyHawk 1TB Surveillance Hard Drive HDD 3.5 5900Rpm 64MB Cache Internal Disk SATA 6Gb/s 1 TB Harddisk Monitoring HD |

Features:
Perfect for surveillance DVR, NVR, and SDVR.
Support each system up to 8 drives(4TB is above 8 drives) and each drive supports 64 cameras.
7*24 work mode and mean time between failure(MTBF) with 1 million hours.
Specialize design for a workload of 180TB per year which is 3 times the support of a desktop drive.
Minimize the consumption of heat and vibration, thus improve the long-term reliability of hard disk.
Precision-tuned for high write surveillance workloads.
7200 RPM on all capacities except for 1TB and 4TB(5900 RPM).
Surveillance optimization specialized HDD, accurate calibration can realize all-weather operation, high in surveillance work load.

Package List:
1 * Surveillance HDD

FAQ:
The solution for booting a hard disk drives beyond 2.2 TB.
Most legacy systems built before 2011 have a traditional PC BIOS. This type of BIOS uses a Master Boot Record (MBR). The MBR Partitions can define a disk drive capacity up to 2.2TB. For Windows operating systems that boot from an MBR are therefore limited to 2.2TB per MBR. Such as a 3TB disk drive in a legacy BIOS and Window system will need a DiscWizard device driver to access the full capacity of a 3TB disk drive. Two partitions will be necessary because of the MBR limitation. The device driver mounts the capacity above 2.2TB with another MBR which looks to the system as a second virtual “physical” device.
GUID Partition Tables (GPT) can define drives larger than 2.2TB. You can use GPT today on any Windows 10/ 8.1/8/7 and Vista system as a non-booting data drive. Windows can only boot a GPT partition on a new type of BIOS called UEFI.

Use Suggestions

Tips One:
The memory capacity of the memory product is usually calculated according to 1MB=1000KB, 1GB=1000MB, and the operating system adopts binary algorithm: 1MB=1024KB, 1GB=1024MB, so there is a certain difference between the display capacity and the nominal capacity of the product.

Tip Two:
Usually, the FAT32 disk system used by the system supports a single file with a maximum capacity of 4 GB. If you need to store a file with more than 4 GB of single files such as HD video, it is recommended that you reformat it to NTFS or exFAT file system. The steps are as follows:
1. Connect the flash memory product to the computer
2. Right click on the flash partition to select format
3. Select NTFS or exFAT format in the file system
4. Click Start and Finish.