FX3U-26MR FX3U-26MT PLC Ethernet Port for Mitsubishi Programmable Controller Logic FX3U-48MR Transistor Relay Analog Board 2AI |

FX3U-26MR FX3U-26MT PLC Ethernet Port for Mitsubishi Programmable Controller Logic FX3U-48MR Transistor Relay Analog Board 2AI |

GENERAL INFO:

FX3U-26MR-E    Relay           16DI/10DO, 2AI/2AO      Ethernet Port

FX3U-26MT-E    Transistor     16DI/10DO, 2AI/2AO      Ethernet Port

FX3U-26MR        Relay            16DI/10DO, 2AI/2AO      No Ethernet port

FX3U-26MT       Transistor     16DI/10DO, 2AI/2AO       No Ethernet port

FX3U-48MR        Relay            24DI/24DO, 2AI/1AO      No Ethernet port

Features

✔ MCU adopts ARM32-bit industrial processor, which is suitable for small PLC for industrial automation applications

✔ Compatible with most commands of Mitsubishi FX3U, supports GXworks2/GxDeveloper programming; comes with independent programming port

✔ All IO ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences. The input supports positive/negative triggering, which is convenient to use

✔ One 10/100Mbps network port, support MC and MODBUS TCP protocol communication

✔ High-speed counter function

✔ Support 2 channels of 100K high-speed pulse output

✔ Built-in analog input and output channels

✔ The power circuit adopts anti-reverse connection and anti-surge design

✔ All key electronic components are imported from major brands, and the warranty is 1 year

✔ Widely applicable to signal acquisition and control of industrial field equipment

Basic functions

1. Basic command speed: 0.18us/step, fast command execution speed

2. Large program capacity: the program memory size is 0~16000 steps, with complete basic/application instructions

3. It has powerful functions such as clock perpetual calendar, RUN/STOP switch, A/D, D/A, firmware upgrade, etc.

4. DIN rail installation, easy maintenance

Communication Function

1. The programming port is the standard RS422 S terminal. In addition, the programming port can also communicate with the touch screen that supports the FX3U PLC protocol.

2. Comes with RS485 communication port, supports MODBUS RTU communication protocol, supports FX3U PLC protocol touch screen communication

3. Comes with 1 RJ45 network port, supports MODBUS TCP communication protocol, and supports Mitsubishi GX Works2 or above programming

The software uses the network port to communicate with the PLC

High-speed counter function

1. Support 6 channels (X0~X5) single-phase high-speed pulse counting, 2 channels AB phase counting, of which 4 channels (X0~X3) 100K single-phase

Counting, 2 channels (X4~X5) 40K pulse counting

Pulse output function

1. ETH-AMX-FX3U-26MT supports 2 channels (Y0~Y1) 100K high-speed pulse output

Main specifications

Model: FX3U-26MR/T-E

Digital input

➤input points: 16

➤Input signal type: switch contact signal or level signal, support

➤positive and negative trigger

➤Input signal voltage: DC 18~28V

➤Insulation circuit: optocoupler isolation

Digital output

➤Output points: 10

➤Output type: Relay

➤Contact capacity: 30VDC/5A, 250VAC/5A

➤Insulation circuit: mechanical insulation

Analog input

➤Input points: 2

➤Input type: voltage/current, DIP switch switch input type

➤Input range: 0~10V/0~20ma

➤Conversion accuracy: 12 bits

Analog output

➤Output points: 2

➤Output type: voltage, current

➤Output range: 0~10V/0~20ma

➤Conversion accuracy: 12 bits

High-speed counter

✈Input points: 6 channels (X0~X5) single phase, 2 channels AB phase

✈Pulse frequency: single-phase 4 channels 100K (X0~X3), 2 channels 40K (X4~X5)

✈Input signal voltage: DC 18~28V

High-speed pulse output

✈AMX-FX3U-26MR-E

✈Number of output points: No high-speed pulse output

✈Pulse frequency: no high-speed pulse output

✈AMX-FX3U-26MT-E

✈Number of output points: 2 channels (Y0~Y1)

✈Pulse frequency: 100K per channel

Communication Interface

✈RS485: 1 channel, support MODBUS RTU, FX3U PLC communication protocol

✈RS422: 1 channel, supports uploading, downloading, and monitoring

✈RJ45 1 channel, 10/100Mbps communication rate, support MODBUS TCP, Mitsubishi FX3U built-in TCP/IP protocol

Power Supply

✈Power supply: DC24V, terminal access; with anti-reverse protection

✈Power consumption: 2W~4W

✈Surge protection: 600W

Structure and environment

✈Size (mm): 129*86*50

✈Installation method: 35mm DIN rail

✈Working temperature: 0℃~+50℃ (no freezing)

✈Working humidity: 10~80%RH (non-condensing)